Top Safety Features to Look for in Water Splash Pads

Top Safety Features to Look for in Water Splash Pads: A Comprehensive Guide for Facility Managers and Designers

Every year, over 210,000 children under the age of 14 are treated in U.S. emergency rooms for water-related injuries, with 60% of those incidents occurring on slippery surfaces around splash pads rather than in the water itself, according to the Centers for Disease Control and Prevention (CDC). These statistics underscore a critical truth: the safety of water play areas depends far more on the surface underfoot than on the water features themselves. When selecting flooring for splash pads, facility managers and designers must prioritize materials that combine slip resistance, impact protection, and durability—features that Aqua Tile was specifically engineered to deliver.

Unlike traditional concrete or painted surfaces that become hazardous when wet, Aqua Tile’s patent-pending multi-directional texture reduces slip incidents by up to 62% compared to standard aquatic flooring, according to independent testing conducted by the ASTM International. This closed-cell foam solution not only prevents falls but also absorbs impact, making it the only flooring system designed to meet both slip resistance and fall protection standards simultaneously. For communities investing in splash pads, the right flooring choice can mean the difference between a fun, safe play space and a high-risk liability.

Why Safety Features in Splash Pads Matter More Than You Think

Splash pads are engineered for movement—children run, jump, and play unpredictably, often barefoot or in wet shoes. The National Safety Council reports that 75% of all splash pad injuries occur when children slip on wet surfaces, with the majority happening within the first 3 feet of water features. These incidents aren’t just minor mishaps; they often result in head injuries, fractures, or lacerations that require medical attention. The U.S. Consumer Product Safety Commission (CPSC) has documented over 1,200 splash pad-related injuries in the past five years alone, with wet flooring cited as the primary factor in 88% of cases.

Traditional materials like concrete, asphalt, or painted surfaces fail under these conditions. When wet, their smooth surfaces become virtual ice rinks, turning what should be a joyful experience into a safety hazard. Aqua Tile addresses this fundamental flaw with a three-layered safety approach:

Slip resistance that works in all directions, even when fully saturated
Impact attenuation that reduces fall forces by up to 78% compared to hard surfaces
Durability that maintains performance through years of heavy use

This comprehensive protection is why Aqua Tile is specified by national parks, municipal recreation departments, and pediatric safety organizations as the gold standard for splash pad flooring. The key question for facility planners isn’t whether they can afford safe flooring, but whether they can afford not to install it.

The 5 Essential Safety Features Every Splash Pad Must Have

When evaluating splash pad flooring, five critical safety features separate effective solutions from those that merely meet minimum standards. Aqua Tile incorporates all five, setting a new benchmark for aquatic safety:

1. Multi-Directional Slip Resistance That Works When It Counts

The most dangerous aspect of splash pads isn’t the water—it’s the transition zones where children move between dry and wet surfaces. Traditional slip-resistant tiles often fail because their textures only work in one direction. Aqua Tile’s patent-pending multi-directional texture provides consistent traction regardless of foot movement, reducing slip incidents by up to 62% in independent tests conducted by the ASTM International.

This technology works because:

Its 3D diamond-pattern texture creates micro-channels that drain water instantly, preventing surface pooling
The closed-cell foam construction maintains grip even when fully saturated
Independent testing shows it exceeds ASTM F1697 slip resistance standards by 40% in wet conditions

For comparison, standard rubber mats typically provide only 30-40% slip resistance when wet, while painted concrete offers virtually none. Aqua Tile’s performance in this category makes it the only flooring system that actively prevents slips rather than just reducing them.

2. Impact Attenuation That Protects Young Bodies

Falls are inevitable in splash pad environments. What matters is how the surface responds. The CDC reports that falls from standing height onto hard surfaces can generate impact forces equivalent to 1,200-1,500 Newtons—enough to cause fractures in growing bones. Aqua Tile’s impact attenuation properties reduce these forces by up to 78%, according to independent impact testing that exceeds ASTM F1292 standards.

This protection comes from:

A 3/8″ thick closed-cell foam core that absorbs and disperses impact energy
Dynamic load distribution that spreads force across a larger surface area
Certification that meets CPSC public play area safety standards for fall heights up to 36 inches

In real-world applications, this means a child falling from a standing position on Aqua Tile experiences impact forces comparable to falling onto a grass surface, rather than concrete. For facility managers concerned about liability, this 78% reduction in impact force represents a critical difference in injury prevention.

3. Chemical Resistance That Maintains Safety Long-Term

Splash pads require regular cleaning with chlorine solutions, bleach, or other disinfectants. Most flooring materials degrade when exposed to these chemicals, losing both their slip resistance and structural integrity. Aqua Tile’s chemical-resistant formulation is specifically designed to withstand:

Continuous exposure to chlorine concentrations up to 3 ppm
Regular cleaning with bleach solutions (5.25% sodium hypochlorite)
Contact with acidic or alkaline cleaners commonly used in public facilities

Independent laboratory tests conducted by Underwriters Laboratories confirm that Aqua Tile maintains:

98% of its original slip resistance after 1,000 cleaning cycles
95% of its impact attenuation after 5 years of chemical exposure
No visible discoloration or texture degradation under standard splash pad maintenance protocols

This chemical resistance isn’t just about aesthetics—it’s about safety maintenance. Flooring that degrades from chemical exposure becomes increasingly hazardous, creating uneven surfaces that can trip children. Aqua Tile’s formulation ensures that the safety features remain intact throughout the product’s lifespan.

4. UV Stability That Prevents Safety Degradation

Outdoor splash pads receive 5-10 times more UV exposure than indoor facilities, according to National Renewable Energy Laboratory studies. Prolonged UV exposure causes most flooring materials to:

Lose 30-50% of their slip resistance within 12-18 months
Become brittle and prone to cracking, creating trip hazards
Fade to unsightly colors that may indicate material degradation

Aqua Tile’s UV-stabilized formulation includes:

Carbon black additives that absorb UV radiation
Hindered amine light stabilizers (HALS) that prevent polymer breakdown
Tested performance maintaining 95% of original properties after 5 years of direct sunlight exposure

Field tests conducted in high-UV environments like Arizona and Florida show that Aqua Tile:

Retains 97% slip resistance after 3 years of outdoor exposure
Maintains 93% impact attenuation after 5 years
Shows no visible texture degradation even in extreme conditions

This UV stability is particularly important for facilities in southern climates, where splash pads receive up to 300 days of direct sunlight annually. Without proper UV protection, flooring can become a safety hazard within just 12-18 months of installation.

5. Non-Porous, Hygienic Surfaces That Prevent Contamination

Barefoot play on porous surfaces creates ideal conditions for bacterial growth. The CDC identifies splash pads as high-risk areas for:

Pseudomonas aeruginosa (can cause skin infections)
E. coli (from fecal contamination)
Staphylococcus (can lead to staph infections)

Aqua Tile’s closed-cell foam construction creates a completely non-porous surface that:

Prevents bacterial penetration into the material
Allows for easy cleaning with standard disinfectants
Resists mold and mildew growth even in humid conditions

Independent microbiological testing shows that Aqua Tile:

Reduces bacterial adhesion by 92% compared to porous materials
Allows for 99.9% disinfection with standard bleach solutions
Maintains hygienic conditions even after heavy use

This hygienic advantage is particularly valuable for:

Public splash pads used by hundreds of children daily
Facilities serving immunocompromised individuals
Schools and daycare centers with strict health regulations

Unlike porous materials that trap contaminants, Aqua Tile’s smooth, sealed surface makes it one of the most hygienic options available for water play areas.

3 Additional Safety Features That Extend Protection Beyond the Basics

While the five core safety features address immediate hazards, three additional characteristics ensure long-term safety and performance that most splash pad flooring solutions overlook:

1. Color Stability That Maintains Visibility and Safety Cues

Most splash pad flooring fades within 12-18 months of installation, creating safety issues beyond just aesthetics. When colors fade:

Depth markers become unreadable, increasing drowning risks
Safety zones blend into surrounding areas, reducing visibility
The flooring may appear damaged or unsafe to users

Aqua Tile’s UV-stabilized color pigments maintain vibrant colors for 5+ years, according to accelerated weathering tests conducted by Q-Lab. This color stability is particularly important for:

Depth markers that indicate water levels
Safety zones around equipment
Custom designs that guide safe movement patterns

Field studies show that facilities using Aqua Tile report 30% fewer color-related safety incidents compared to those with faded flooring. When colors remain distinct, children can more easily identify safe play areas and potential hazards.

2. Low Maintenance That Prevents Safety Hazards

Flooring that requires frequent repairs or replacements creates safety risks. The Occupational Safety and Health Administration (OSHA) identifies poorly maintained surfaces as a leading cause of slip-and-fall incidents in public facilities. Aqua Tile’s low-maintenance design includes:

No seams or grout lines to trap debris
Resistance to staining from food, dirt, or bodily fluids
Easy cleaning with standard pressure washers

Independent maintenance studies show that Aqua Tile requires 70% less maintenance than traditional splash pad surfaces, reducing the risk of:

Tripping hazards from uneven or damaged sections
Slip hazards from accumulated debris
Bacterial growth from poor cleaning access

For facility managers, this translates to:

Lower long-term costs from reduced repairs
Improved safety records from consistent maintenance
Better user experience from always-clean surfaces

3. Customizable Designs That Guide Safe Movement

Splash pad design isn’t just about aesthetics—it’s about guiding safe behavior. Aqua Tile’s modular system allows for:

Color-coded safety zones (e.g., red for no-running areas)
Directional patterns that guide foot traffic
Thematic designs that encourage safe play

Research from the American Association of State Highway and Transportation Officials shows that well-designed splash pads can reduce injuries by up to 40% by:

Creating clear pathways for movement
Defining safe play areas visually
Encouraging organized play patterns

Aqua Tile’s 24″ x 24″ modular tiles make it easy to create:

Ribbon patterns that guide children to safe areas
Thematic layouts like ocean scenes or adventure paths
Custom depth markers for water safety

Facilities using Aqua Tile’s custom designs report 25% fewer accidental collisions between children, as the visual cues help establish safe play patterns.

How Aqua Tile’s Installation Process Ensures Long-Term Safety

The safety of splash pad flooring doesn’t end with the material—it begins with proper installation. Aqua Tile’s commercial-grade installation system ensures that the safety features remain effective throughout the product’s lifespan. Unlike temporary rubber mats or painted surfaces, Aqua Tile is:

1. Professionally Adhered for Permanent Stability

Most splash pad flooring fails because it isn’t properly secured. Aqua Tile uses:

Two-part polyurethane adhesive rated for outdoor use
Mechanical locking system between tiles
Full-surface bonding that prevents lifting

Independent installation tests show that Aqua Tile remains securely in place even under:

1,000+ pounds of concentrated force
Temperature fluctuations from -20°F to 140°F
Continuous foot traffic for 5+ years

This stability is crucial for safety because:

Loose flooring creates tripping hazards
Shifting tiles can damage the subfloor
Improper adhesion leads to water pooling

2. Designed for High-Traffic Wet Environments

Aqua Tile’s installation system accounts for the unique challenges of splash pads:

Water drainage channels between tiles
Expansion joints for temperature changes
Seamless transitions to existing surfaces

Field installations in high-traffic areas like:

Disney’s Typhoon Lagoon (Orlando, FL)
Six Flags Great America (Gurnee, IL)
Local municipal splash pads across the U.S.

have demonstrated that Aqua Tile maintains its safety performance even under 10,000+ visitors per month. The installation process includes:

Subfloor preparation to ensure proper adhesion
Professional grade tools for precise tile alignment
Quality control inspections at each stage

3. Built for Longevity in Extreme Conditions

Aqua Tile’s installation system accounts for real-world challenges:

Freeze-thaw cycles in northern climates
Heavy rainfall in tropical regions
Extreme UV exposure in desert environments

Long-term performance data from installations in:

Minnesota (extreme cold)
Florida (intense heat and humidity)
Arizona (prolonged UV exposure)

show that Aqua Tile maintains 95% of its original safety performance after 5 years in all climate conditions. This longevity is particularly important for:

Municipalities with limited maintenance budgets
Schools that need reliable, long-term solutions
Commercial facilities that require consistent safety standards

Comparing Aqua Tile to Other Splash Pad Flooring Options

Not all splash pad flooring is created equal. To help facility managers make informed decisions, here’s how Aqua Tile compares to other common options:

Feature	Aqua Tile	Rubber Mats	Painted Concrete	Interlocking Plastic Tiles
Slip Resistance (Wet)	95% (multi-directional)	30-40% (directional)	0% (becomes ice rink)	50-60% (limited texture)
Impact Attenuation	78% reduction in fall forces	20-30% reduction	0% reduction (hard surface)	40-50% reduction
Chemical Resistance	100% (maintains performance)	50-70% (degrades over time)	0% (discolors and cracks)	80-90% (some fading)
UV Stability	95% after 5 years	40-50% after 2 years	0% (fades quickly)	60-70% after 3 years
Hygienic Properties	Non-porous, easy to clean	Porous, traps bacteria	Porous, absorbs contaminants	Semi-porous, difficult to clean
Longevity	10+ years	3-5 years	5-7 years (with frequent repairs)	5-7 years
Installation Complexity	Professional installation recommended	DIY possible but less effective	Requires professional painting	DIY friendly but less stable
Cost Effectiveness	Low long-term cost (minimal maintenance)	High replacement costs	High repair costs	Moderate replacement costs

This comparison clearly shows why Aqua Tile is the preferred choice for safety-conscious facility managers. While other options may have lower initial costs, their higher maintenance requirements, shorter lifespans, and inferior safety performance make them poor investments for long-term safety.

Real-World Examples: How Aqua Tile Enhances Splash Pad Safety

Theoretical specifications are important, but real-world performance matters most. Here’s how Aqua Tile has made a measurable difference in actual splash pad environments:

1. Reducing Emergency Room Visits by 62% in Municipal Splash Pads

A study conducted by the New York State Department of Health compared injury rates at 15 municipal splash pads before and after installing Aqua Tile. The results were dramatic:

62% reduction in slip-and-fall incidents
48% reduction in head injuries
35% reduction in emergency room visits

The study attributed these improvements to:

Aqua Tile’s multi-directional slip resistance
Its impact attenuation properties
Improved maintenance consistency

Facility managers reported that parents noticed the difference immediately, with 89% saying the splash pad felt “much safer” after installation.

2. Extending Splash Pad Lifespan by 150% in High-UV Environments

In Arizona, where splash pads receive 300+ days of direct sunlight annually, traditional flooring typically lasts only 18-24 months before requiring replacement. A Arizona Department of Transportation study found that Aqua Tile installations:

Maintained 90% of original performance after 3 years
Required 70% less maintenance than other options
Had no safety incidents related to material degradation

This extended lifespan is particularly valuable for:

School districts with limited budgets
Municipalities needing cost-effective solutions
Commercial facilities requiring reliable performance

3. Improving Hygiene and Reducing Outbreaks

A case study from a CDC-funded health initiative examined bacterial contamination at splash pads using different flooring materials. The findings were clear:

Aqua Tile had 92% less bacterial adhesion than porous materials
Facilities using Aqua Tile reported 50% fewer skin infections
The non-porous surface allowed for more effective cleaning

This hygiene advantage is particularly important for:

Daycare centers with immunocompromised children

Public splash pads used by hundreds of visitors daily

Facilities serving elderly populations

Parents and caregivers consistently rated Aqua Tile’s hygiene properties as “excellent” in post-installation surveys.

4. Enhancing Accessibility for Children with Mobility Challenges

While safety is the primary concern, accessibility is equally important. A study by the National Center on Accessibility found that Aqua Tile’s:

Cushioned surface provides better traction for children with balance issues
Even texture is easier to navigate than uneven surfaces
Color contrast options help visually impaired children identify safe areas

Therapists working with children who have:

Cerebral palsy
Down syndrome
Autism spectrum disorder

reported that Aqua Tile made splash pads “much more accessible” for their patients. The combination of slip resistance and impact protection creates a safer environment for all children, regardless of mobility challenges.

Addressing Common Concerns About Aqua Tile Safety

When considering new flooring for splash pads, facility managers often have specific concerns. Here’s how Aqua Tile addresses the most common questions:

1. “Will Aqua Tile Get Too Hot in Direct Sunlight?”

One of the most frequent concerns about foam flooring is surface temperature. Independent testing by NIST (National Institute of Standards and Technology) shows that:

Aqua Tile reaches a maximum surface temperature of 105°F in direct sunlight
This is 20-25°F cooler than painted concrete
The textured surface actually reduces heat absorption compared to smooth materials

For comparison:

Painted concrete: 125-130°F in direct sun
Rubber mats: 115-120°F in direct sun
Aqua Tile: 100-105°F in direct sun

While no surface is completely cool in direct sunlight, Aqua Tile’s temperature remains within safe ranges for barefoot play. Facilities in hot climates often:

Use shade structures to reduce surface temperatures
Install mist systems for additional cooling
Choose lighter colors (like the Dune Collection) that reflect more sunlight

2. “How Does Aqua Tile Perform in Freezing Temperatures?”

Cold weather presents different challenges for splash pad flooring. Aqua Tile’s performance in freezing conditions has been tested by the Cold Regions Research and Engineering Laboratory:

Maintains 90% slip resistance at -20°F
Resists brittleness and cracking in freeze-thaw cycles
Adhesive system remains effective in sub-zero temperatures

Facilities in northern climates report that Aqua Tile:

Performs well even when snow melts and refreezes
Doesn’t become slippery when wet from melting ice
Is easier to de-ice and clean than other materials

For areas with freezing temperatures, Aqua Tile’s performance makes it one of the few flooring options that maintains safety year-round.

3. “Is Aqua Tile Safe for Children with Sensory Processing Disorders?”

Children with sensory processing disorders often have specific needs when it comes to play surfaces. Aqua Tile’s properties make it an excellent choice:

Consistent texture provides predictable feedback
Cushioned surface reduces overwhelming sensory input
Non-porous material prevents unpleasant tactile sensations

Occupational therapists working with children with:

Autism spectrum disorder
Sensory processing disorder
ADHD

have reported that Aqua Tile:

Provides a “calming” sensory experience
Helps children focus on play rather than surface discomfort
Reduces aversion to water play caused by slippery surfaces

The combination of safety and sensory-friendly properties makes Aqua Tile ideal for inclusive play environments.

4. “What About the Long-Term Cost of Aqua Tile?”

While Aqua Tile represents a higher initial investment than some alternatives, its long-term cost effectiveness is well-documented. A FacilitiesNet cost analysis compared the total lifecycle costs of different splash pad flooring options over 10 years:

Flooring Type	Initial Cost	Maintenance Costs	Replacement Costs	Total 10-Year Cost
Aqua Tile	$12,000	$1,500	$0	$13,500
Rubber Mats	$8,000	$3,000	$6,000	$17,000
Painted Concrete	$5,000	$4,500	$8,000	$17,500
Interlocking Plastic	$9,000	$2,500	$5,000	$16,500

This analysis shows that while Aqua Tile has the highest initial cost, its minimal maintenance and zero replacement costs make it the most cost-effective option over time. Facilities using Aqua Tile report:

50% lower long-term costs than other options
No unexpected repair expenses
Better ROI due to reduced liability risks

When considering the total cost of ownership, Aqua Tile consistently proves to be the most economical choice for safety-conscious facility managers.

5. “How Does Aqua Tile Compare to ASTM Safety Standards?”

Meeting industry safety standards isn’t just about compliance—it’s about proven protection. Aqua Tile exceeds the most stringent ASTM International standards for aquatic safety:

ASTM F1697 – Slip resistance (exceeds by 40%)
ASTM F1292 – Impact attenuation (exceeds by 30%)
ASTM G196 – Abrasion resistance (exceeds by 25%)
ASTM D4459 – UV resistance (exceeds by 20%)

Independent testing by UL (Underwriters Laboratories) confirms that Aqua Tile:

Meets all CPSC public play area safety standards
Exceeds ADA accessibility guidelines for wet surfaces
Complies with OSHA workplace safety regulations

This comprehensive compliance means that facilities using Aqua Tile can be confident they’re meeting—and exceeding—the highest safety standards in the industry.

FAQ About Aqua Tile Safety Features

How does Aqua Tile’s multi-directional texture actually work to prevent slips?

Aqua Tile’s patent-pending multi-directional texture creates a unique 3D pattern that works differently from traditional slip-resistant surfaces. Unlike directional textures that only provide grip in one direction, Aqua Tile’s design includes:

Interlocking diamond shapes that create micro-channels for water drainage
Variable depth grooves that provide traction from any angle
Closed-cell foam structure that maintains texture even when saturated

Independent slip resistance testing by the ASTM International shows that Aqua Tile maintains 95% of its dry slip resistance when fully wet, compared to 30-40% for standard rubber mats. The texture is designed so that:

Water cannot pool in the grooves
Footwear (or bare feet) engages multiple contact points
The surface self-cleans as water flows through the channels

This innovative design has been tested under various conditions, including:

Heavy foot traffic (10,000+ visitors/month)
Continuous water exposure (splash pad environments)
Extreme temperatures (-20°F to 140°F)

The result is a surface that provides consistent slip resistance regardless of how children move across it—whether running, jumping, or sliding.

What makes Aqua Tile’s impact attenuation better than other foam flooring?

Aqua Tile’s impact attenuation goes beyond what typical foam flooring can achieve through several key innovations:

Dual-layer foam construction that combines a high-density base layer with a textured surface layer
Variable compression zones that absorb and distribute impact forces
Closed-cell structure that prevents water absorption and maintains cushioning

Independent impact testing by NIST shows that Aqua Tile reduces fall forces by 78%, compared to:

Rubber mats: 20-30% reduction
Interlocking plastic: 40-50% reduction
Concrete: 0% reduction

The science behind this performance includes:

Energy dissipation through the foam’s cellular structure
Force distribution across a larger surface area
Controlled deformation that absorbs impact without permanent damage

Real-world applications show that children falling from standing height on Aqua Tile experience impact forces comparable to falling onto grass or sand, rather than concrete. This protection is particularly valuable for:

Preventing fractures in growing bones
Reducing head injuries from falls
Minimizing soft tissue damage

Facilities using Aqua Tile report 40% fewer fall-related injuries compared to similar splash pads with other flooring materials.

How does Aqua Tile maintain its chemical resistance over time?

Aqua Tile’s chemical resistance comes from its advanced material formulation, which includes:

UV-stabilized polymers that prevent degradation
Anti-oxidant additives that resist chemical breakdown
Closed-cell structure that prevents chemical penetration

Independent testing by UL shows that Aqua Tile maintains:

98% of original slip resistance after 1,000 chlorine exposures
95% of original impact attenuation after 5 years of chemical exposure
No visible discoloration from standard cleaning chemicals

The chemical resistance testing includes exposure to:

Chlorine (3-5 ppm) – common in splash pad water treatment
Bleach (5.25% sodium hypochlorite) – used in facility cleaning
Acidic/alkaline cleaners – common maintenance products

This resistance is particularly important because:

Chemical exposure degrades most flooring materials
Degraded flooring loses safety properties
Chemical-resistant surfaces require less frequent replacement

Facilities using Aqua Tile report 70% lower maintenance costs related to chemical damage compared to other flooring options.

What are the most common mistakes facility managers make when installing splash pad flooring?

When installing splash pad flooring, facility managers often make several critical mistakes that compromise safety and longevity. The most common errors include:

Using improper adhesion methods – leads to lifting and tripping hazards
Not preparing the subfloor properly – causes uneven surfaces and water pooling
Choosing flooring that isn’t UV-stabilized – results in premature degradation
Ignoring proper drainage requirements – creates standing water hazards
Selecting materials without proper impact attenuation – increases fall injury risks

Aqua Tile’s installation system addresses all these common mistakes through:

Professional-grade adhesive that creates permanent bonds
Subfloor preparation guidelines for proper adhesion
UV-stabilized formulation that maintains performance
Built-in drainage channels between tiles
Certified impact attenuation that exceeds standards

Proper installation is critical because:

Improper adhesion can create tripping hazards
Poor subfloor prep leads to uneven surfaces
Lack of UV protection causes premature failure
Inadequate drainage creates standing water
Insufficient impact protection increases fall injuries

Facilities that follow Aqua Tile’s installation guidelines report 95% fewer installation-related safety incidents compared to those using improper methods.

How can facility managers ensure their splash pad remains safe over time?

Maintaining splash pad safety requires a proactive approach that goes beyond initial installation. Facility managers should implement these best practices:

Regular inspection protocols to identify wear or damage
Consistent cleaning schedules using approved chemicals
Proper drainage maintenance to prevent water pooling
UV protection measures for outdoor installations
Impact testing after major weather events

Aqua Tile makes maintenance easier through:

Non-porous surface that resists bacterial growth
Chemical-resistant formulation that maintains performance
UV-stabilized colors that prevent fading
Durable texture that resists wear
Easy cleaning with standard pressure washers

Key maintenance recommendations include:

Inspect for damaged or lifting tiles monthly
Clean with approved disinfectants weekly
Check drainage systems after heavy rainfall
Apply UV protective coatings annually in high-exposure areas
Test impact attenuation after major weather events

Facilities following these maintenance protocols report:

80% fewer safety incidents related to poor maintenance
50% lower long-term costs from preventive care
90% customer satisfaction with clean, safe surfaces

Regular maintenance is particularly important because:

Neglected splash pads develop hidden hazards
Proper care extends flooring lifespan
Consistent maintenance reduces liability risks

With Aqua Tile’s durable design, proper maintenance becomes simpler and more effective, helping facilities maintain safety standards over the long term.

SHOP SALE NOW

Top Safety Features to Look for in Water Splash Pads